What is pressure altitude?Reading Altitude from the Standard Datum Plane Pressure altitude is the altitude indicated when the altimeter is set to 29.92 inches of mercury (inHg). It is the airplane's height above the standard datum plane: the theoretical level where atmospheric pressure is 29.92 inHg, or about 14.7 pounds per square inch. That datum is a pressure reference. As atmospheric pressure changes, the standard datum plane can lie above, at, or below mean sea level (MSL). As such: • True altitude is the airplane's actual height above MSL. • Pressure altitude is the altitude that corresponds to the pressure sensed by the static system when the altimeter is referenced to 29.92 inHg. The FAA's standard-atmosphere model assigns a pressure to each altitude. Because pressure decreases as altitude increases, a lower sensed pressure corresponds to a higher pressure altitude. Pilots use pressure altitude as an input for density altitude, true airspeed, and aircraft performance. Density altitude adds the effect of nonstandard temperature: it is pressure altitude corrected for temperature variation from the standard atmosphere. Applying Pressure Altitude at Green Castle The published Green Castle Airport information lists IA24's field elevation as 756 feet MSL. To obtain pressure altitude directly, set the altimeter to 29.92 inHg and read the indicated altitude. For planning, a useful approximation is: Pressure altitude ≈ field elevation + (29.92 − altimeter setting) × 1,000 Suppose the altimeter setting is 29.42 inHg. The setting is 0.50 inHg below standard, so the pressure altitude at IA24 is approximately 1,256 feet: 756 + 500. If the altimeter setting were above 29.92, pressure altitude would be below field elevation. Pressure altitude is only one piece of the puzzle. Add outside air temperature to determine density altitude, then use the airplane's approved Airplane Flight Manual or Pilot's Operating Handbook charts. The Club's N3936T aircraft-document page, for example, includes the Arrow handbook and its chart for converting pressure altitude and temperature into density altitude. The earlier standard-pressure refresher explains the 29.92 inHg reference. Club members can also practice changing an altimeter setting and reading the result with the interactive altimeter tool. FAA Sources and References • FAA Aviation Weather Handbook, FAA-H-8083-28B, Chapters 4 and 8 • FAA Pilot's Handbook of Aeronautical Knowledge, FAA-H-8083-25C, Chapters 8 and 11 Next Week Airport Operations - Non-Towered Airport Traffic Pattern What is the recommended entry into a non-towered airport pattern when approaching from the downwind leg side of the pattern? Next week, we will look at how the familiar 45-degree entry organizes your arrival before you join the downwind. Where you aim and when you merge matter because the goal is to become predictable to traffic already established in the pattern.
0 Comments
Leave a Reply. |
AuthorGCAC flight instructors bring wisdom from a multitude of aviation backgrounds totaling tens of thousands of flight hours. Categories
All
Archives
November 2026
|
RSS Feed